18kW Hybrid PV System - Commercial
- Type
- Commercial
- Location
- Valenzuela
- System size
- 19.71 kWp
- Scope
- Consultancy, Designing, Installation & Commissioning
Powering Progress:
The Valenzuela Commercial Solar & Storage ProjectIn the bustling commercial hub of Valenzuela City, reliance on the utility grid can pose operational risks, from fluctuating energy tariffs to unpredictable power outages. To establish long-term energy independence and operational resilience, JFL Solar was contracted to design, install, and commission a high-capacity, single-phase commercial hybrid solar energy and storage system tailored to the facility's heavy daytime and critical backup demands.
Building the Generation Engine:
The journey began on the roof, where our engineering team deployed an array of 27 ultra-high-efficiency 730W N-Type bifacial solar panels. Delivering a peak direct-current capacity of 19.71 kWp, this array was specifically selected to capitalize on Valenzuela's high solar irradiance. By leveraging bifacial technology, the system captures both direct sunlight from above and reflected light (albedo) from the roof surface beneath, capturing up to 10–20% in passive yield gains throughout the day.
The panel strings were meticulously balanced and routed down to the heart of the system: a powerful 18kW Solis Single-Phase Hybrid Inverter. Acting as the central brain and power conversion hub, the Solis inverter dynamically handles the incoming DC generation, converting it with high efficiency to match the facility's single-phase 220V/230V commercial electrical distribution.
Storing Energy for Seamless Continuity:
Harvesting raw solar power is only half the battle; storing it effectively completes the solution. To ensure true energy security around the clock, JFL Solar integrated an advanced Energy Storage System (ESS) consisting of four massive 314Ah Lithium Iron Phosphate LiFePO4 battery modules, offering approximately 64.3 kWh of nominal DC energy reserve.
Equipped with an intelligent, closed-loop Smart Battery Management System (BMS) communicating directly with the inverter via CAN/RS485 protocols, the battery bank continuously balances individual cells, monitors thermal levels, and manages state-of-charge limits to optimize battery health and cycle lifespan over thousands of charges.
Photos
-
Two blocks of panels on the flat roof deck, with room left around them for safe maintenance -
From above: the array on the building, right in Valenzuela's busy commercial hub -
Bifacial panels also catch the light reflected from the roof deck beneath them -
The equipment room: the Solis 18 kW hybrid inverter between the protection enclosures, four 314Ah LiFePO4 battery modules (about 64 kWh) below, and the protection boxes on the side -
Cables run neatly from the inverter and enclosures through the trunking down to the four battery modules -
JF Legaspi with the finished system, ready to keep the business running through outages