12kW Hybrid PV System - Residential, Quezon City
- Type
- Residential
- Location
- Quezon City
- System size
- 15.66 kWp
- Scope
- Design, Supply, Installation & Commissioning
This young businessman, who is also into trading, wanted dependable solar power for his home. JFL Solar & Renewables designed, supplied, installed and commissioned a 12 kW hybrid solar PV system with battery storage for his residence in a subdivision in Quezon City.
The Solar Array
27 AE Meteor 580W bifacial PV modules are installed on the home's metal roof in three neat rows of nine, for a total array of 15.66 kWp. Bifacial modules collect sunlight on both sides: direct sunlight on the front, and light reflected from the roof on the back.
The Hybrid Inverter
The array feeds a 12 kW LuxPower hybrid inverter, the brain of the system. It decides every moment where the solar power goes: to the loads first, and any extra into the batteries.
Battery Storage
The system was first installed with two ATE (Alltopelec) 51.2V 280Ah LiFePO4 batteries. The client eventually upgraded to three batteries (see the last two photos), which now store about 43 kWh of energy. Each battery has its own display and battery management system (BMS) that protects the cells.
How the System Works Every Day
- Daytime: solar power runs the loads directly, and the surplus charges the batteries.
- Evening and night: the batteries take over, so the home keeps running on stored solar power.
- Brownouts: the inverter switches the backup loads to battery power automatically.
A Clean, Safe Installation
Everything is wall-mounted in a tidy layout: the inverter between steel enclosures for the DC and AC protection devices, a common cable trunking, and the batteries below. A red emergency stop button lets the owner shut down the system safely in one press.
The result: a clean, low-maintenance solar PV system that powers a busy businessman's home with solar energy, with peace of mind during brownouts.
Photos
-
The 15.66 kWp array on the two-storey home in Quezon City -
The three rows of modules seen from the front of the house -
Straight from above: three rows of nine modules, neatly lined up -
The array on the flat metal roof -
Bifacial modules going onto the mounting rails during installation -
Cables from the array run down in conduit, protected from sun and rain -
JF Legaspi on site while the team wires the LuxPower 12 kW hybrid inverter -
After the upgrade: three ATE 51.2V 280Ah LiFePO4 batteries below the inverter (the client started with two and later added a third) -
The finished wall: LuxPower hybrid inverter, steel enclosures for the protection devices, and the three batteries