12kW Hybrid PV System - Residential, Santa Rosa
- Type
- Residential
- Location
- Santa Rosa, Laguna
- System size
- 12.6 kWp
- Scope
- Design, Supply, Installation & Commissioning
A Hybrid Solar PV System for a Doctors' Home in Santa Rosa, Laguna
For a husband and wife who are both medical doctors, reliable power at home is not a luxury. Long shifts, on-call nights and early mornings leave no room for brownouts or rising electric bills. JFL Solar & Renewables designed, supplied, installed and commissioned a 12 kW single-phase hybrid solar PV system with battery storage for their home in a subdivision in Santa Rosa, Laguna.
The Solar Array
On the home's metal roof, our team installed 20 Jinko Solar 630W bifacial PV modules in two neat rows of ten, for a total array of 12.6 kWp. The N-type bifacial modules are mounted on aluminium rails with a clear walkway between the rows for safe cleaning and maintenance, and all DC cabling runs in protected conduit along the roof edge.
The Hybrid Inverter
The array feeds a 12 kW GoodWe single-phase hybrid inverter, the brain of the system. It decides every moment where the solar power goes: to the household loads first, then into the batteries, and only then to the grid.
Battery Storage
Two Dyness PowerBrick SC 314Ah 51.2V LiFePO4 batteries provide about 32 kWh of stored energy. Each battery has its own display and battery management system that talks to the GoodWe inverter, keeping the cells balanced, cool and safe over thousands of cycles.
How the System Works Every Day
- Daytime: solar power runs the house directly, and the surplus charges the batteries.
- Evening and night: the batteries take over, so the home keeps running on stored solar power instead of buying from the grid.
- Brownouts: the inverter switches the backup loads to battery power automatically, so lights, refrigeration and essential appliances stay on.
A Clean, Safe Installation
Everything is wall-mounted in a tidy layout: the inverter between two steel enclosures for the DC and AC protection devices, a common cable trunking, and the two batteries below. A red emergency stop button lets the owners shut down the system safely in one press, and every enclosure carries proper electrical hazard labels.
The result: a quiet, low-maintenance solar PV system that gives two busy doctors dependable power at home, lower electric bills and peace of mind during brownouts.
Photos
-
The 12.6 kWp array on the doctors' home in Santa Rosa, Laguna -
The array seen from the street side of the house -
Two neat rows with a clear walkway between them for safe maintenance -
The GoodWe 12 kW hybrid inverter between the DC and AC enclosures, with the two Dyness batteries below -
Everything wall-mounted with a common cable trunking, and an emergency stop button within reach -
Side view of the inverter, enclosures and batteries -
The GoodWe 12 kW single-phase hybrid inverter up and running -
Two Dyness PowerBrick SC 314Ah LiFePO4 batteries store the solar energy for long shifts and on-call nights -
JF Legaspi with the finished installation